Complete Interior Detailing Prescription Kit

PRODUCT INSTRUCTIONS:

1. The first step to a Complete Interior Detailing Prescription is to vacuum large debris and dirt from the car’s interior.
2. Next, beginning with the dash, clean using Dr. Beasley’s Interior Cleanser and microfiber towels to remove any dirt or spots from any plastic finishes. Use a Vent Brush to remove dust from small crevices and vents.
3. Continue the same process on door panels, floorboards, and center consoles to ensure a thorough clean. For tough stains or marks, let cleanser soak in and continue to scrub with Scrub Square, then dry (repeating as necessary). Moving to surfaces such as vinyl or upholstery seats, spray Dr. Beasley’s Interior Cleanser and continue to wash with a Horsehair Interior Brush which uses specifically designed Horse Hair for ultimate care. Allow the cleanser to fully dry by using a towel to soak up any excess liquid. Repeat as necessary and use Dr. Beasley’s Opti-Surface Cleanser to remove dirt and tough stains.
4. For seat seams, use a Nylon Detail Brush and be sure to thoroughly scrub all seams as they can accumulate dirt and dust quite easily.
5. For any pet hair or tough-to-grab rubbish, use a Pet Hair Remover Brush on any surface to remove such debris from your car’s interior.
6. When cleaning the carpet, spray Dr. Beasley’s Carpet & Upholstery Cleanser and scrub with an Interior Brush to remove dirt from the carpet fibers. For stains, allow the carpet cleanser to soak in and repeat the process until removed. Use towels to dry and soak up the excess liquid from the carpet or use a shop vac for excess moisture.
7. Once carpets are complete, spray windows with Glass Cleanser and dry with a microfiber Glass Towel.
8. Now that the entire interior has been cleaned, it’s time to protect. Spray Dr. Beasley’s pH Neutralizer on all plastic, vinyl, carpet, and upholstery surfaces and dry.
9. Next, apply Dr. Beasley’s Plastic Conditioner with a Terry Applicator to dash, console, runners, and any other plastic surfaces that have been neutralized. Allow to cure and wipe off with a Microfiber towel.
10. Next, spray the Carpet with the Carpet & Upholstery Protection evenly and allow time to dry. For upholstered seats, spray Carpet & Upholstery Protection onto a towel and evenly wipe seats down and allow drying.
11. Now that the interior is cleaned and protected, vacuum carpets for the final Complete Interior Detailing step to assist in drying and to remove any debris that may have accumulated during the cleaning process.