The Details
Description
PRODUCT DETAILS:
A highly effective cleaner designed for automotive paint protection film and vinyl car wraps, Film Cleanser breaks down contaminants at the chemical level without damaging the surface. Great for spot cleaning and prepping for the Film Coating Kit, it’s a must-have for anyone with a protective film on their vehicle.
When sprayed on to a contaminated thermoplastic surface area, Film Cleanser clings to contaminants to break them down at the chemical level. After a few minutes, the cleanser can be wiped away and the surface will be contaminant-free. For more stubborn contaminants, several applications may be needed.
RECOMMENDED USES:
- Vinyl Car Wraps
- Vinyl Decals and Stripes
- PPF
Won’t Damage Film
You step out onto your driveway early one morning only to find a smattering of freshly laid bird droppings right on your PPF. Not sure what to do, you run to check the FAQ from your film’s manufacturer only to find they recommend harsh solvents like acetone or lacquer thinner. Sound like a bit much? You’d be right – if you’re not careful with chemicals like these, you could end up burning right through your film. You shouldn’t have to risk ruining your film just to get it clean! That’s what makes Dr. Beasley’s Film Cleanser the best choice for ridding your PPF of tough contaminants – it’s 100% solvent-free, so you can use as much as you want without worrying about damaging your film.
Remove Stubborn Contaminants Before They Can Etch
When you see insect remains or bird droppings on your film, you have to clean them as soon as possible to stop them from etching through the plastic. Wait too long and you may have to get the whole film replaced! That’s why you’ll want to have Film Cleanser on hand before disaster strikes – that way, you won’t be scrambling for the right cleaner while bug juice is dissolving your film.
KEY FEATURES:
- Eliminates contaminants without damaging surfaces.
- Works in just minutes.
- Great for PPFs, clear bras, and vinyl car wraps.
PRODUCT INSTRUCTIONS:
- Spray on to the contaminated area.
- Let sit for 1-2 minutes, then wipe down with a microfiber towel.
- If the contaminant remains, repeat steps 1-2 and allow for longer dwell time.
TODD’S PRO TIPS:
- DO NOT allow product to dry.
- DO NOT scrub or use unnecessary pressure when wiping down.
- If applied to a ceramic coated film, re-apply coating to the affected area after use.
- Before applying, test a small amount in an inconspicuous area to check surface compatibility.
Ask A Pro
There are no questions yet, be the first to ask something for this product.
Reviews
There are no reviews yet.
