The Details
Description
PRODUCT DETAILS:
For professionals and experienced enthusiasts only.
NANO-RESIN PRO KIT is a complete nano-ceramic coating system. 100% solids and durable for 25+ years, Nano-Resin Pro naturally self-heals minor scratches actively repels water with superhydrophobic performance, resists chemicals, and prevents oxidation.
When applied to a surface primed with Paint Coating Builder, Nano-Resin Pro works by creating a cross-linked mechanical bond, fusing with the paint to form a 3D-structured barrier that lowers surface energy for superhydrophobicity, fills in imperfections for added gloss, and resists etching, marring, and UV fading. Once applied occasional applications of AdvanceCoat: Gloss will maintain the coating’s gloss, durability, and hydrophobicity.
RECOMMENDED USES:
- Gloss Paint Finish
COATING DURABILITY:
- 25-years with proper maintenance.
Naturally Self-Heals Micro-Marring and Fine Scratches
A Nano-Resin Pro coating is made of elastomer-derived ceramics that absorb scratches, gradually springing back into their original shape.
Superhydrophobic for Active, High-Performance Water Repellency
Surface-engineered for a low sliding angle, Nano-Resin Pro actively pushes water off the surface to self-clean and reduce water spots.
No Solvent, 100% Solids Formula For Extreme Thickness
Get 6 μm of coating thickness with only a single layer thanks to Nano-Resin Pro’s solvent-free, 100% solids formulation.
Ultra-Deep & Hyper-Reflective Candy-Like Gloss
Nano-Resin Pro creates a gloss with incredible depth and enhanced clarity for a maximum distinction of image.
What The Kit Includes:
- (1) 1 oz Nano-Resin Pro
- (1) 2 oz Paint Coating Prep
- (1) Foam Block Applicator
- (2) Suede Cloths
- (2) Pipette
KEY FEATURES:
- NATURALLY SELF-HEALING. Elastomer-derived nanostructure naturally self-heals fine scratches.
- LIFETIME OF PROTECTION. Extreme durability for 25-years or more of protection with proper maintenance.
- 100% SOLIDS & ULTRA-THICK. No solvent & 100% solids formula creates 4-6 μm thick coating with one layer.
- SUPERHYDROPHOBIC WATER REPELLENCY. Engineered for low sliding angle and maximum superhydrophobicity
PRODUCT INSTRUCTIONS:
For professionals and experienced enthusiasts only.
- Before applying Nano-Resin Pro, paint must be prepped. Clay and polish your paint with a light compound and a random orbital machine buffer. If your paint is heavily scratched, paintwork correction may be required.
- Remove any residual matter from polishing using a panel wipe.
- Spray Paint Coating Builder onto a panel or small area. Wrapping the suede cloth around the foam block applicator, spread the Paint Coating Builder in vertical overlapping lines down the panel, followed by horizontal overlapping lines.
- Let sit 2-3 minutes, then remove with a microfiber towel. Repeat steps 3-4 until all desired paint surfaces are coated.
- Wrap a new suede cloth around the foam block applicator and use the included pipette to apply a line of Nano-Resin Pro down the center of the cloth.
- Start by applying Nano-Resin Pro in vertical lines down the panel. After you’ve covered your panel with vertical lines, go back and repeat with horizontal lines. This crosshatching will ensure full coverage. Avoid getting the product in panel gaps.
- Let the product sit on the surface for 30 seconds to a minute. Wipe the panel with a clean, dry, microfiber towel.
- Repeat steps 5-6 on each panel until your entire vehicle is protected. Reapply several drops of Nano-Resin Pro to your applicator every few panels or as needed.
- Allow coating to cure undisturbed for one hour. After, if any product is left over, re-apply to high impact areas.
TODD’S PRO TIPS:
- DO NOT apply Nano-Resin Pro in direct sunlight.
- DO NOT allow this product to freeze during storage.
- If applied in temperatures less than 65-70° the product may need more time on the surface before removal. In warmer, more arid climates Nano-Resin Pro may need less time.
- Inspect the vehicle in natural light for a better view of high spots.
- Keep vehicle completely dry between applications and for at least 1 hour after final application. After 1 hour the vehicle can be exposed to light rain without affecting the bonding process.
- The coating will cure after 24-48 hours, after which it is fully bonded to the paintwork.
- Avoid washing the vehicle with soap for 7 days after application. After this follow our prescribed maintenance regimen, including the use of AdvanceCoat: Gloss as a coating reinforcer.
- Use the entire bottle when applying. DO NOT re-cap opened bottles for future applications.
Ask A Pro
There are no questions yet, be the first to ask something for this product.
Reviews
There are no reviews yet.
